Acoustic Line
Alesis
Allen Heath
American Audio
Ashly
Behringer
Chang Young
Charis
Crest Audio
dbx
DPA
EV
Focusrite
Focal
Inkel
inter-M
KRK
LAB Gruppen
Mackie
Midas
Marantz
Neutrik
Rode
Sennheiser
Shure
Seco
SA(Stage Accompany)
T.C electronic
Trantec
Tannoy
Tascam
Teac
Tube Tech
Vic Boss
Yamaha
XTA
American Audio
LAB Gruppen
Behringer
Crest Audio
Acoustic Line
Behringer
EV
KRK
Focal
Stage Accompany
Tannoy
Allen Heath
Behringer
Mackie
Midas
Yamaha
Allen Heath
Behringer
Yamaha
Mackie
Vic Boss
Seco
Behringer
DPA
EV
Shure
Rode
Sennheiser
Sennheiser
Shure
Trantec
Charis
EV
Sennheiser
Shure
Behringer
Grado
philips
American Audio
TEAC
Inkel
Tascam
Inkel
TEAC
Alesis
Ashly
behringer
dbx
Focusrite
T.C electronic
Tube Tech
랙케이스
마이크케이스
알루미늄 랙케이스
철재 랙케이스
SKB
건반스탠드
마이크스탠드
스피커스탠드
보면대
자바라
스피커브라켓
창영스탠드
LCD Project
전동 Screen
엘리베이션
Behringer
Mackie
케이블
멀티케이블
▨ 현재위치 : HOME > 쇼핑몰상품보기 > 프로세서 > 프로세서
 
* 가격이 수시로 변경될 수 있습니다. 참고바랍니다.   가격흥정문의전화 : 02 - 766 - 8391

상 품 명 : dbx 223XL
(크로스오버)
판 매 가 : 435,000원
마일리지 : 0점
제 조 원 : dbx
주문수량 :
 

상 품 소 개

제품특징

크로스오버는 단순히 크로스오버 포인트를 나눠주는 기계 일뿐이 라고 생각할 수도 있지만 223XL는 다른제품들과는 달리 이러한 생각을 거부한다. 223XL는 모두 차별화된 발란스형 XLR입력과 출력을 제공한다. 공연도중 어떤설정에서의 돌 발적인 변화를 막기위해서,223XL의 콘트롤 부분중 몇가지는 뒷면 패널에 위치에 있다. 223XL은 스 테레오 2웨이나 모노 3웨이의 2개의 모드를 가지고 있다.

제품스 팩

INPUT

Connectors:

XLR

Type:

Electronically balanced/unbalanced, RF filtered

Impedance:

Balanced >50k ohm, unbalanced >25k ohm

Max Input Level:

>+21dBu balanced or unbalanced

CMRR:

>40dB, typically >50dB at 1kHz

OUTPUTS

Connectors:

XLR

Type:

Impedance- balanaced/unbalanced, RF filtered

Impedance:

Balanced 200 ohm, unbalanced 100 ohm

Max Output Level:

 >+21dBu balanced/unbalanced into 2k or greater

SYSTEM PERFORMANCE

Bandwidth:

20Hz to 20kHz, +/-0.5dB

Frequency Response:

< 3 Hz to > 90 kHz, +0/-3 dB

Signal-to-Noise:

Ref: +4 dBu, 22 kHz measurement bandwidth

Stereo Mode

>94dB (Low Output)
>92dB (High Output)

Mono Mode:

>94dB (Low Output)
>93dB (Mid Output)
>92dB (High Output)

Dynamic Range:

> 114 dB, unweighted, any output

THD + Noise:

< 0.004% at +4 dBu, 1 kHz
< 0.04% at +20 dBu, 1 kHz

Interchannel Crosstalk:

< -80 dB, 20 Hz to 20 kHz

CROSSOVER FREQUENCIES:

Stereo Mode: Low/High

45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

Mono Mode: Low/Mid:

45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

Mid/High:

45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

Filter type:

Linkwitz-Riley, 24 dB/octave, state- variable

FUNCTION SWITCHES

Front Panel (Low Cut):

Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel

Phase Invert:

Inverts the phase at the output, one switch per output

Rear Panel:
x1 / x10:

Multiplies the low-high (mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel

Mode:

Selects stereo 2-way or mono 3-way operation and disables all LEDs for controls that are non-functional in the selected mode

LF sum:

Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode

INDICATORS

Stereo Operation:

Green LED

Mono Operation:

Yellow LED

Low Cut:

Red LED per channel

x10

Green LED per channel

Phase Invert:

Red LED per output (2 per channel)

POWER SUPPLY

Operating Voltage:

100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ

Power consumption:

15W

Main Connection:

IEC 320 receptacle

PHYSICAL

Dimensions:

1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)

Weight:

3.7 lbs. (1.7 kg)

Shipping Weight:

5.4 lbs. (2.5 kg)

Note: Specifications subject to change without notice.